I love that so many people were interested in making one of these wreaths from my previous post. They’re super easy and I guarantee you’ll love it.
Watch the VIDEO!
You don’t need much to make it.
- approx 25 yards of 6 inch burlap (more or less depending on how full you like it). Buy burlap with “finished edges” and it won’t fray. Usually sold in 10 yard spools.
- one wire wreath form – I used 18 inch (again, choose your size) for the big ones and 10 inch for small (green one)
- decoration – I used a dark green 6 inch burlap as a ribbon. Don’t go overboard decorating it. Less is more I say, except at buffets.
- corresponding thread
A few supply tips: You can buy less expensive burlap in bulk, 100 yards online, (seems like a lot, but makes about 5 wreaths) However, if you can hit Micheal’s with a 40% off coupon, then it’s worth buying the smaller spools there. The wire wreath forms can be expensive too, so needless to say, this was about 10 trips with about 10 different coupons. You can see, to the left…that’s a long receipt I intend on hiding from my husband. (I should have cropped that out!)
This is a very fast project, there’s no sewing or gluing or even cutting, until you get to decorating your wreath. The burlap part can be finished in about 20 minutes. They really turn out beautifully.
Find a place to start on the wire frame, any section will do. Notice that the wire frame is divided into sections, and each section has three slats.
Take the end of your burlap and fold it over about 4-5 inches, making a loop, and push it up the first slat in your first section.
Once it’s up, make a second loop using the tail of burlap that’s hanging underneath. Bring that fold/loop through the next slat so it sits beside the first, but on the parallel slat. We’re working right to left, then back from left to right. Each slat on the wire frame should get a loop. Three loops per row on this frame.
Once you’ve reached the inner edge of the row, squish the fabric up, like you’re opening an umbrella, toward the little stop bar on the frame. You want to squeeze as many rows of loops into each section as you can. You’ll see the bunching starting already.Then, from underneath fold together the next four inches, and push that up into the MIDDLE slat underneath the first row. If you were to start the row back directly underneath, in the inner slat, then the loop would fall out.
You can start pulling a bit more than 4 inches in parts to give it a more irregular look, or really squish in lots of row in each section if you really like it puffy. If you think you might run out of burlap, then don’t put as many rows in the section. Try and to use the same amount of fabric in each section, this will keep the circle from looking lopsided.
Once you get all the way around the wreath and you’re satisfied with it’s girth…cut it off. It likely is secure enough that you don’t need to sew it to the frame, but you can it if you like or simply tuck the last of it into a loop. There’s lots of places for the edge of the last loop to hide.
Now to the decorating. But first…snack break.
Decorating your wreath, here are some options:
Big burlap bow, burlap flowers, family initials, Christmas bulbs, holly, berries. You name it. It’s yours so do what you like. If you’re giving it away, I’d suggest keeping it simple.
The dining room looks like a sweat shop.
I also made a smaller one out of a 10 inch frame, and the same green burlap I used for the bow, for the inside of our front door.
The green burlap is a nice twist on traditional pine.
Looks a little small on the door, I think, might be better suited for a window.
I hope you’ll give it a try, feel free to email me if you have any questions!
- Burlap Wreath (tryonahomemadelife.com)